Node: Interactive LED Processor
The LED Processor Input node allows you to communicate with an LED processor that provides interactive data over the local network. Currently, only the NovaStar MCTRL510 LED Processor and compatible are supported. A Node: LED Tile Layout provides information about the tiles connected to the processor, and the touches seen from the processor as provided as a List<Touch>.
|localInterface||LocalInterface||The local network adapter that will be used to communicate with the LED processor.|
|remoteAddress||RemoteAddress/IP||The address of the LED processor on the network, including its port (for NovaStar MCTRL510 processors this is always 6000). This IP address of the process can be configured using the Companions: Nova SetIP tool.|
|cabinetLayout||LedCabinetLayout||The layout of LED tiles connected to this processor, typically configured using a Node: LED Tile Layout.|
|touches||List<Touch>||The raw touches current seen by the LED processor.|
|processTimeMillis||Number||The amount of time, in milliseconds, that it took to fully process the last frame of data after it was received from the LED processor.|
|tileOutlineMaterial||Material||A material showing the outlines of the tiles connected to the LED processor as defined by the |
|tileDebugMaterial||Material||A material showing the outlines of the tiles connected to the LED processor as defined by the |
There are no functions exposed by this node.
No examples provided.